Hi please active sensor door

When using the P1P with AMS, when a roll of filament runs out I want the next slot of the same material to take its place. currently the AMS knows that the spool has run empty but does nothing but continue printing with no filament.

Seams are looking pretty bad even with the right pressure advance and flow value, especially on round objects. In the Softfiver fork there are several options to improve the seam which help quite a lot. I really think this should get more attention as more and more people are not satisfied with the...

Describe the bug I’ve found when I print with a bed temp of 60 or higher, my prints have this spiral artefact. I’ve done all the regular maintenance and cannot get it to go away. Prints that are 30-35 ped temp do not have the artefact. It seems to me that the bed is periodically taking power from th...

Describe the bug Loading/importing a 3mf file made with any other application will lost any data but the model data. 3mf File for This Bug https://files.printables.com/media/prints/251587/stls/2716404_07447c22-0d7f-4a66-9385-ced1f1ffe233/firstlayercalibration-firstlayer.3mf#_ga=2.54709357.734743191....

Cancel a failed print object on a plate when printing object with multiple part or multiple objects. I miss the ability to cancel ONE specific object on a plate when printing object with multiple part or multiple objects. Sometimes a part will detach from the plate and I want to be able to tell the...

Firmware P1P: 01.01.01.00 AMS: 00.00.05.75 (only using original Bambu Lab Basic PLA, which is recognized by the AMS) Bambulab: 1.4.2.13 I'm using a P1P along with AMS. When I restart the device and Bambulab the K-Factor for some Spools in the AMS are set to "894685568,000" without doing anything. Th...

Describe the bug The print head stays on top of the model for few seconds when the print finishes. I think it's caused by the M400 ; wait for buffer to clear gcode in Machine end G-code. M400 ; wait for buffer to clear G92 E0 ; zero the extruder G1 E-0.8 F1800; retract G1 Z{max_layer_z + 0.5} F900 ;...

HEX Color in Colorpicker It would be great if you could also enter the HEX value of the color when creating a custom filament. Currently I help myself by manually editing the JSON file of the profile and entering the HEX value of the color there.

Describe the bug Bridge angle is the same as other solid layers, instead of 90° to the bridge Corners are not bridged correctly because they have no 2nd side to connect to yet, (or only a single strand of perimeter) Prusaslicer for this reason (and maybe others) switches to 90° instead of 45° for t...